Camera Basics

It seems like quite a lot of my friends and family have bought new DSLR cameras lately. I've had about half a dozen people ask me how their DSLRs work. While the actual buttons and controls vary from camera to camera, there are some things that are helpful to understand no matter what camera you use. I believe that a good understanding about how Aperture, Shutter Speed, and ISO work together is the foundation that every photographer needs to better use their camera. I wrote a post about it on my old blog a few years ago. You can go to my old blog here. I thought I'd re-share that post since I think that it will be helpful in answering the types of questions I've been getting lately.

The All-Important, Not so Holy, Trinity of Photogaphy

For some of you, this will be old information, but hopefully for others this will be new. Either way, I hope this will help you understand a little more about photography and your camera.

At its most basic, photography is simply capturing light. The amount of light and the characteristics of the light determines how the photo will turn out. When you press the shutter release, the shutter opens allowing light to pour onto either the film or the image sensor. In this process, the camera uses three mechanisms to control the amount of light that is captured in a photograph: aperture, shutter speed, and ISO.

My Canon 40 D

The aperture is the opening that lets light into the camera through the lens. The size of this opening can be made either larger or smaller to let in more or less light as needed. The size of the opening is denoted using f-numbers such as f/2.8, f/3.5, f/4, f/5.6, f/8, f/11, f/16, f/22 etc.... Although somewhat counterintuitive, smaller f-numbers indicate a larger opening. So, f/2.8 will let in a lot more light than f/22. Adjusting the aperture is also one of the primary ways to control the depth of field in a photo. Depth of field is the distance between the nearest and farthest objects in a scene that appear acceptably sharp in an image. A smaller f-number ( like f/2.8) will have a much shallower depth of field than a larger f-number (like f-22). I'm sure I will talk more about depth of field in another post to come. On my camera ( on the fully manual mode), the aperture is adjusted using the wheel on the back of the camera.

Wheel that adjusts aperture

The next mechanism that controls the amount of light is shutter speed. Shutter speed is the time the shutter remains open when taking a photo. Shutter speeds are denoted in terms of seconds such as 1/250th, 1/125th, 1/60th, and 1/30th of a second etc.... With the bulb setting, which is available on many cameras, you can keep the shutter open for minutes even hours. Obviously the longer the shutter remains open, the more light that will enter the camera. An important side note is that generally any shutter speed longer than 1/60th of a second will cause camera shake (resulting with blurry images) if you are holding the camera by hand. (I've recently been reading the rule of thumb is 1/focal length of your lens) At this point it is usually smart to attach your camera to a tripod. Though with a good image stabilizing system and a steady hand, you will probably be able to squeeze out a few more fractions of a second. Using shutter speed is one of the main ways to capture motion in photography. A fast shutter speed will freeze objects mid-motion, and a slow shutter speed will blur the objects motion. Once again, this is a topic I'm sure I'll discuss further in another post. On my camera, you adjust the shutter speed using a wheel that is jsut above the shutter release button.

Wheel that adjusts shutter speed

The final mechanism is ISO, which is a measure of the film's ( or image senor's) sensitivity to light. These are denoted like ISO 100, 200, 400, 800, etc... The higher the number, the more sensitivity to light. Although, higher ISOs also result in more grain or image noise in a photo.. On my camera, the ISO is adjusted by pressing a button on the top of the camera and then turning one of the previously mentioned wheels ( I can never remember which).

ISO Adjustment

All these three things combine to control the amount of light that is captured. By increasing one and decreasing another, you can let the same amount of light in but with different effects (different depth of field, more or less grain, etc..) This is about as much as I understand on the topic. If anyone has anything further to add, please post a comment.

Preparing to be a Family of Four

My wife's due date is fast approaching. It kind of snuck up on me. We have less than four weeks now! Before we know it, we are going to have a beautiful baby girl.

We're doing our best to prepare ourselves to be a family of four.  Jamie has been hitting up garage sales for baby girl clothes. She has been re-organizing the kids room to try to make all the new clothes fit. Knitting projects are strewn all over the house. We've done just about all that we need to, but I still don't feel ready. But I'm not sure if you can ever really be ready.

Before the baby arrives, Jamie wanted to try to get some baby bump pictures. So on Sunday afternoon, we went out to make a go of it. It was bright blue skies and beautiful weather; a great day to be outside.

Here are the shots that we got.

Walking with Mommy

Baby Bumps

Pregnancy Glow

Mommy, Jonah, & Baby Girl

Unhappy Big Brother



Proud Parents

 

I think we got some good ones. It started out a little rough. Jonah wasn't cooperating and it was really really bright, which made for some harsh shadows. Then we decided to walk further into the woods, and suddenly things started clicking. The light was better. Jonah was more willing to be in front of the camera. It was a good thing we didn't give up right away.

 

Who knows? The next post I do might be introducing our daughter.